The operations/services we offer as well as the description thereof:
- Exterior thorough wash with neutral pH shampoo of a 5.5 valence;
- Compressed air and cloth drying;
- Decontamination with clay;
- Degreasing the lacquer with isopropyl;
- Cleaning off the bitumen;
- Lacquer correction;
- Lacquer polish;
- Lacquer protection;
- Cleaning the rims;
- Protection of rims;
- Hydration of tyres;
- Polishing the rims;
- Restoration/Polish of headlights;
- Polishing the stainless steel/chrome plated plastic ornaments;
- Hydration of plastic/rubber ornaments;
- Decontamination of windows;
- Protection of windows/hydrophobic treatment;
- Cleaning and waterproofing/sealing the textile ceiling (soft top).
This service includes the following: detailed exterior cleaning/washing, removal of bitumen/adhesive, decontamination with mild/aggressive clay, compressed air blowing and drying, isolation of the car with protective tape, degreasing with isopropyl, correction of lacquer in 1-3 steps, polishing/furbishing the lacquer, cleaning the rims, tyres and protecting them, polishing the chrome plated elements and ornaments of the final evacuation.
. It is done in six stages: rinsing, shampooing, washing with the microfiber or lambskin glove, rinsing, compressed air blowing and drying. We use shampoos with neutral pH, namely the 5.5 valence so that the protective layer will not be affected (e.g. sealant, glaze, wax).
We can solve this problem with citrus-based cleaning agents, without scratching the lacquer of the car. Also, if the car has been collated, the remaining adhesive can be removed with the same care.
It is done with dual action (orbital) machines in order not to wear down the lacquer layer. Although in some cases we need to also use classical rotational type correction machines, we want to use them only in exceptional cases. Therefore, the correction of the lacquer (removal of scratches, holograms) is done using lacquer correction machines, sponges of variable abrasiveness as well as high or medium abrasive pastes. This rectification process is recommended to be carried out every 1-3 years.
It is done with dual-action machines by using medium and fine abrasive sponges and pastes. This way, you can get rid of only fine scratches and holograms. In principle, this operation is carried out in order to make the car body glossy.
This service is carried out by chipping a lacquer layer, so that after the correction and polishing the result will be a mirror-type one and the car body would shine perfectly.
The lacquer is degreased in two stages: before the correction to provide support in the rectification process, as well as after polishing, to ensure that the desired protection has the necessary adhesion.
This service is intended to liven up the appearance as well as to prevent the premature aging due to sunlight and external environmental factors.
This operation provides better visibility when driving in the rain and snow, also increasing the life of the wipers. Durability of the treatment: 12 months.
It is done by using substances such as: glaze (an effect of wetness and profound gloss), polymer sealant (provides gloss and protection to the lacquer, 6 month durability), solid wax (gloss and protection, 3 month effect), ceramic sealant (protects the lacquer for 12 months and provides gloss).
Visibility in traffic is mandatory. Their restoration improves both the visibility and the appearance of the car.
Services provided: Decontamination of headlights – the clay decontamination of exterior surfaces of the headlights helps to remove the contaminants from the surface of the protective lacquer. This process is recommended before applying any protection, if the lacquer is in a good state.
Restoration of headlights – through the process of restoring the headlights, the protective degraded and contaminated lacquer is removed from their exterior surface. This process is done in at least 5 steps and is recommended when the headlights are dull or scratched.
Polishing the headlights – by polishing the headlights, a thin layer of the degraded lacquer is removed from their exterior surface. This process is done in 2 steps and is recommended when the headlights become dull or as a cheaper alternative (but with slightly lesser results) to the restoration of headlights.
Application of protective sealant on the headlights – after the restoration, the headlights remain unprotected against the harmful effects of nature. The sealant protects the plastic against some of these, such as UV rays, liquids and contaminants. The application of the sealant is recommended to be done once every 6 months.
Application of the protection film on the headlights – the protection film is far more beneficial than the sealant because it protects the headlight also against impacts (crushed stones, etc.), scratches and is much more durable (5 years). It is recommended to apply the film right after the restoration process.